Cooper's Strip Club Shop
USA
Stripping Packs
The best way to start with Cooper's - everything you need in one box.
A Cooper's Stripping Pack contains all the main components of the Cooper's Stripping System: Stripper to dissolve any paint or varnish, Flusher to rinse the surface completely clean, professional spray applicators, and all the scrubbing tools to lift the softened finish from within the surface. One box, no guesswork, no sanding - just pick the size that fits your project.
Not sure which pack? See the size guide below, or call us free on 1833 579 0489 and we'll help size your project for you.
Temporary Stock Notice
Some products are temporarily out of stock due to ongoing global shipping delays.
We expect all affected products to be back in stock by approximately mid-August.
We apologise for any inconvenience this may cause and appreciate your patience and understanding.
Please be assured that items marked as “In stock” are available and ready to ship.
Free Express Shipping
Free shipping within the contiguous United States on orders over USD $149
All Prices shown in USD
Fast Dispatch & Express Shipping
Good news for our U.S. Customers: all U.S. orders ship tariff free
U.S. orders ship from domestic U.S. Warehouse
Size Guide
Which Pack Is Right for Your Project?
Every pack contains the same complete system - the difference is how much surface it will strip. As a guide (actual surface stripped, based on pack litres):
| Pack | Pack litres | Strips approx.* | Typical projects* |
| Pack A | 2L | 2–8 m² | One to two doors or four chairs or a large dining table or a four sash window |
| Pack B | 5L | 5–20 m² | Two to five doors or a dining suite or a room of skirtings & architraves or a small car (e.g.Mini) |
| Pack C | 10L | 10–40 m² | A room or two of joinery or floors or a regular car body (e.g. Mustang) or a small boat |
| Pack D | 20L | 20-80 m² | Villa weatherboards or whole-house joinery or large floors or heritage projects |
*Coverage depends on finish thickness — thin varnish strips approx. 4 m² per litre; ultra-thick, many-layered paint approx. 1 m² per litre. The ranges above run from ultra-thick to thin.
Rule of thumb: old villas and layered lead paint sit at the thick end of the range; single-coat varnish and stain at the thin end. Or take the guesswork out entirely: free call 1833 579 0489 or email us photos of your project and one of our experts will help size it for you, free.
How much Stripper does my project need?
Tell us what you’re stripping and we’ll estimate the Cooper’s Stripper you need and the best pack to start with.
Please enter at least one measurement or item above so we can calculate an estimate.
This is a guide only — actual coverage depends on the type and thickness of the old finish. Strip a test section or piece first, then order Stripper Refills for the rest. Not sure?
Every Pack Contains the Complete System
- Cooper's Stripper — the fast-acting, deep-penetrating dissolver that strips any paint and any varnish: lead paint, enamel, acrylic, 2-pack, powder coat, polyurethane, lacquer, shellac, oil, stain and antifoul. Non-caustic, non-acidic, low odour — and safe for wet lead paint removal with no toxic dust.
- Cooper's Flusher — the waterless rinse that carries away softened finish and Stripper residue. No grain raising on timber, no rust on metal — so once dry, you refinish without sanding (provided no previous surface damage is present).
- Professional spray applicators — applicator bottles with genuine Viton-sealed triggers, built to survive stripping solvents that kill ordinary spray heads in seconds.
- The stripping tool kit — long-strand European steel wool, grit embedded pads and copper & brass detail brushes to lift the softened finish from flats, grain, carvings and corners.
Suitable for timber, veneer, metal, glass and masonry — and every item in every pack is available to reorder individually, so you only ever buy what you need.
